Instructions for Use
Storage, transport and handling
MS120 Single Stage Rotary Vane Pumps User Manual / 87-900-150-01(B) 141/198
Unpacking
The pump is supplied in a special protective packing. If this shows
signs of damage which may have occurred during transport, contact
Contact Center.
When unpacking the pump, be sure not to drop it and avoid any kind
of sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100% recyclable and complies with EEC Directive
85/399.
NOTE
Normal exposure to the environment cannot damage the pump. Nevertheless, it
is advisable to keep it closed until it is installed in the system, thus preventing
any form of pollution by dust.
Remove the strips that close the carton box on the pallet. Remove the
carton box.
Figure 4
Remove 8 screws which close the clamps and then remoive 4 clamps.
To Next Page
Loading...
Need help?
General
