Instructions for Use
Preparation for Installation
MS120 Single Stage Rotary Vane Pumps User Manual / 87-900-150-01(B) 144/198
Preparation for Installation
Accessories supplied with the pump
The pump is delivered with the following accessories required for
commissioning and maintenance:
Oil Tank
Funnel load oil
Connection load oil
Oil drain pipe
I/O Mating Connector
Spare fuses.
Assembly
Remove inlet and exhaust plastic caps.
The pump is supplied ready for use, there are not other parts to be
assembled.
Pump is without oil, see paragraph “Oil change” for the instructions
on how to fill in the oil.