Technical Information
MS40-S User Manual 197
Description of the MS40-S
The MS40-S Single Stage Rotary Vane Pumps are rotary vane pumps oil sealed,
driven by an electrical motor.
Figure 22 X3705-64000
This vacuum pump is suitable for pumping non corrosive gases.
The main features are:
all parts in direct contact with the fluid pumped are free of copper alloys;
all materials are carefully selected to provide extended life;
due to its design features and low number of gaskets, the pump requires little
maintenance, disassembly and reassemble are easy and require minimal time.
The oil guarantees perfect sealing of the discharge valves, enters the pump to
ensure lubrication and sealing of the parts inside, facilitates heat dissipation and
reduces pump noise.
The pump is equipped with a special anti-suckback device which automatically
isolates the vacuum system when the pump stops. This avoids rises in pressure or
oil flow in the vacuum system.
Vacuum Seals
A special feature of this pump is the low number of gaskets that are employed.
The seals in the circuit are obtained by means of FKM gaskets.
To Next Page
Loading...
Need help?
General
