Instructions for Use
188 MS40-S User Manual
Stop of MS40-S
There are no special procedures for switching the pump off; to switch the pump off,
act on the mains switch. Disconnect the mains cable from the power supply only
with the mains switch off.
Maintenance
Personnel responsible for pump operation and maintenance must be well-trained
and must be aware of the accident prevention rules.
Death may result from contact with high voltages. Always take extreme
care and observe the accident prevention regulations in force.
When machine is powered take care on account of moving parts and high
voltages.
If you have to perform maintenance on the pump after a considerable time
in operation, leave it to cool as temperature of the outer surface may be in
excess of 60 °C.
To Next Page
Loading...
Need help?
General
