Instructions for Use
MS40-S User Manual 189
Always disconnect the power supply to the pump before starting
maintenance work. Place a special warning signs over the power supply
breaker switch: MACHINE UNDERGOING MAINTENANCE - DO NOT POWER
ON. When finished, remove the safety warning.
Do not change the oil immediately after stopping the machine as the oil
temperature may still be high.
Before returning the pump to the constructor for repairs the "Request for Return"
sheet attached to this instruction manual must be filled-in and sent to the local
sales office. A copy of the sheet must be inserted in the pump package before
shipping.
If a pump is to be scrapped, it must be disposed of in accordance with the specific
national standards.
To Next Page
Loading...
Need help?
General
