Maintenance
TwisTorr 304 FS User Manual / 87-901-027-01 237/304
Maintenance
The TwisTorr 304 FS does not require any maintenance. Any work
must be carried out by authorized personnel.
WARNING!
Before carrying out any work on the system, disconnect it from the mains,
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center or
“Agilent advanced exchange service" who can supply a reconditioned
system to replace that broken down.
NOTE
Before returning the pump to the constructor for repairs, or advanced exchange
service, the "Request for Return" sheet attached to this instruction manual must
be filled-in and sent to the local sales
office. A copy of the sheet must be inserted
in the system package before shipping.
If a system is to be scrapped, it must be disposed of in accordance
with the specific national standards.
To Next Page
Loading...
