Agilent Technologies X3500-64000

Technical Information
Vibration Isolator Installation
17
TwisTorr 304 FS User Manual / 87-901-027-01 285/304
Vibration Isolator Installation
Four vibration isolators for ISO and CFF inlet flange version pumps
are available as accessories.
The four model part numbers are the following:
 model 969-9344 for ISO 100 flange;
 model 969-9345 for ISO 160 flange;
 model 969-9334 for CFF 6” flange;
 model 969-9335 for CFF 8” flange.
They typically reduce the vibration transmitted from the TwisTorr
304 FS to the system by a factor of 20.
Please refer to the relevant instruction manual.