CHAPTER 8
30 31
SOLO 2
8.1 Configuring Solo 2 as an access point (AP)
This is Solo 2 default configuration and is the easiest and most direct connection
mode, ideal if you want to communicate with one Solo 2 using one PC. It is free and
so completely accessible by anyone. Please set an access password as soon as
possible.
To establish a Wi-Fi connection:
n
ensure that the Wi-Fi is enabled
n
read your Solo 2 Name
To set other parameters create a unique password to protect your device/your
network.
With a password, the communication is safe and encrypted using WPA2-PSK
standard.
Characters allowed in the password are all letters, also capital, all digits and these
characters: ‘+-_()[]{}$£!?^#@*\\\”=~.:;/%"
“Space” type can be used if it is not the first one because this could cause
incomprehension in some Windows
TM
versions.
n
run Race Studio 3
n
click Wi-Fi icon and select your
device
n
in a few seconds the connection
is established
To Next Page
Loading...
