CHAPTER 8
40 41
SOLO 2
To enable Race Studio 3 correctly working on a Mac with virtualized Windows
TM
:
n
press Wi-Fi icon
n
select “Wi-Fi Settings…” icon
n
enable the checkbox shown here below.
8.7 Connected device visualization issues
It may occur that using Race Studio 3 on a Mac with virtualized Windows the device
connected via Wi-Fi takes some time to be shown in the network or is not shown at
all. This is why we always suggests using an Wi-Fi (WLAN) router.
This router work as an Access Point allowing more external devices to connect to its
network. Solo 2 Wi-Fi configuration is to be set on Existing Network as explained in
the related paragraph.
To Next Page
Loading...
