118
Configuring the Station
6.2.6 Send Test Email
Send a test email to the destination address set in “Email Addresses (→page 113)”.
How to send a test email
1. Click [Send].
2. The following email is sent to the set email address.
Example of sending an email message:
When sending a test email from the station (Station Number: 003, Station Name: Door Station 3, Location: 2F
West)
From △△△△@△△△△△.com
Date and time 7:22 11/20/2018
To
CC
xxxx@xxxxx.com
Subject 003 Door Station 3 Test Email
Text Test Email sent at "20181120 07:21:40."
Station Number: [003]
Station Name: [Door Station 3]
Station Location: [2F West]
Important
• "UTF-8" encoding is used for the "Subject" and "Image Filename." Characters may display incorrectly depending on the email
client. To avoid this, set the encoding method to "UTF-8."
To Next Page
Loading...
