148
Configuring the Station
7.2 Communication
■ Talk Timeout [sec]♦
■ Communication Start Tone
Description Configure the call duration when making an outgoing call from this station or answering a call
from an incoming page. The call duration during an incoming call will be the call duration
configured on the other station.
Settings • Infinite: Do not end until end operation is performed.
• 30 - 600 sec: Select when setting a value from 30 to 600 sec (by 1 sec).
Default values 60 sec
Important
• When on a call with an VoIP Phone, this will be the call duration configured on the VoIP Phone.
Description Configure the tone to play on this station when a call starts.
Settings • None
• Call Pattern1
• Call Pattern2
• Call Pattern3
• Call Pattern4
• Call Pattern5
• Call Pattern6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the sound source registered in
“Custom Sound Registry (→page 85)”.
Default values None
To Next Page
Loading...
