Aiphone IX SERIES Web Setting Manual

122
Configuring the Station
■ Program Type
■ IPv4
■ IPv6
■ Destination Port
■ SSL
■ Connection
Description Set the SIF program type code.
Settings 0000 - 1111
If this is set to "0000," "0001," or "0011," the
“Transmission Trigger (→page 123)” setting will be
disabled.
Default values —
Description Set the IPv4 address of the SIF destination.
When using a hostname, set up
“DNS (→page 68)”.
Settings 1.0.0.1-223.255.255.254 or hostname(1-64 alphanumeric characters)
Default values —
Description Set the IPv6 address of the SIF destination.
When using a hostname, set up
“DNS (→page 68)”.
Settings ::FF:0 - FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or hostname (1-64 alphanumeric
characters)
Default values —
Description Set the port number of the SIF destination.
Settings 1 - 65535
Default values —
Description Set whether SSL is used for communication.
Settings • Enable
• Disable
Default values -
Description Set the socket connection method.
Settings • Socket
• HTTP
Default values -

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom