Aiphone IX SERIES Web Setting Manual

17
Introduction
4.2.3 Add a station
Use this flowchart to add a station.
1. Configure the DHCP server to assign a static IP address.
For how to set up the DHCP server, refer to its manual.
2. Connect a PC to the station to be added.
Connect stations one at a time to avoid IP address conflict.
“Connecting to a PC (→page 44)”
3. Log in to the Web server of the station.
“Log in to the Web server of the station to be configured (→page 45)”
4. Set "Static / DHCP" to "IPv4 DHCP."
“Static / DHCP (→page 66)”
The station is restarted and the IP address assigned by the DHCP server beforehand will be assigned. If an IP address
cannot be assigned, it will default to "192.168.1.160." If this happens, cycle power to the station, and then the IP address
will be assigned again.
5. Log in to the Web server of the station with the assigned IP address.
“Log in to the Web server of the station to be configured (→page 45)”
6. Configure “Language (→page 63)”.
Click [Update] to update the settings.
7. Configure the station.
"Configuring the station" “Configuring the Station (→page 59)”
8. Add data to other stations and software if required.
9. Done.

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom