68
Configuring the Station
3.2.1.1 Schedule Settings
How to configure the Weekly Schedule
Configure the time to perform relay output for each day of the week, from Sunday to Saturday. 12 schedules can be
set for each day.
1. Configure the "Start Time" and "End Time" for each day of the week.
2. Click [Update].
■ Start Time
■ End Time
How to delete the Weekly Schedule
1. Return settings to their default values, and click [Update].
Description Set the time to start the relay output.
Settings 00:00 - 23:59
Default values -
Description Set the time to end the relay output. If set earlier than “Start Time (→page 68)”, the end time will
be the time the following day.
Settings 00:00 - 23:59
Default values -
To Next Page
Loading...
