70
Configuring the Station
■ End Time
How to delete Daily Schedule
1. Select the day to delete a schedule from "Calendar."
2. Schedules for the selected day are displayed in the "Set schedule list."
• If a weekly schedule is configured for the selected day of the week, it will also be shown.
3. Click [Delete] for the schedule to delete, and click [Update].
• Refer to “How to delete the Weekly Schedule (→page 68)” to delete weekly schedules.
3.2.2 Option Relay Control Authentication Key
Description Set the time to end the relay output. If set earlier than “Start Time (→page 69)”, the end time will
be the time the following day.
Settings 00:00 - 23:59
Default values -
Description If “Option Relay Control (→page 67)” is set to "Enable" and "Speed Dials / Favorites" - "TLS" is
set to "Enable" on the requesting station, configure the key used to decrypt encrypted
communication.
If this matches the "Option Relay Control Key" of the station performing the operation, the Relay
Output can be controlled.
Settings 1 - 20 digits
Default values —
Note
• The "Option Relay Control Authentication Key" is displayed as "●●●●●" in the Settings window.
• Only one Option Relay Control Authentication Key can be set for each station. It will be shared with multiple Relay Output.
To Next Page
Loading...
