Air Weigh BinMaxx - Page 19

16
To select brightness:
1. From the weight display, press ESC to reach the main menu.
2. Press▼untilSETUPisashing.PressOK.
3. Press▼untilDISPLYSETUPisashing.PressOK.
4. Press▼untilBRIGHTNESSisashing.PressOK.
5. Use▲or▼toselecteitherBRIGHTorDIM.PressOK.The
screen will display either BRIGHT, (Now Bright) or DIM, (Now
Dim), respectively.
To select light timeout:
1. From the weight display, press ESC to reach the main menu.
2. Press▼untilSETUPisashing.PressOK.
3. Press▼untilDISPLYSETUPisashing.PressOK.
4. Press▼untilLITETIMEOUTisashing.PressOK.
5. ThedisplayshowsBACKLIGHTTIMEOUTandaashing
numbernexttoMINS.Use▲or▼toselectthenumber
of minutes you want the backlight to stay on after your last
keypad use. Press OK to accept your changes.
To select Show or Hide Accumulated Net Weight:
1. From the weight display, press ESC to reach the main menu.
2. Press▼untilSETUPisashing.PressOK.
3. Press▼untilDISPLAYSETUPisashing.PressOK.
4. Press▼threetimes.YouwillseeSHOWTOTALandHIDE
TOTAL.Use▲or▼toselectSHOWTOTALorHIDE
TOTAL, whichever is appropriate for your use. Press OK to
accept your changes. The screen will read ACCEPTED.
Using BinMaxx | Setting Up Your Scale