Air Weigh BinMaxx - Scale Wont Turn On

24
Scale Won’t Turn On
If your scale won’t turn on, this could be a problem with the power
supply. Follow the steps below to troubleshoot for potential causes.
1. Checkyourpowersupply.Openthedashandndthe
ComLink. Check to make sure the wire harness leading to
Power is securely plugged in and all wires are unbroken.
2. Check the back of your display to make sure the wire harness
is securely plugged in and all wires are unbroken.
3. Test the power and ground circuits using a voltmeter. There
should be at least 9.5 volts of power entering your system.
4. If you identify a break in the circuits or there is a lack of
power, or if there is full power but the scale still will not turn
on, call Air-Weigh Support for further assistance.
Troubleshooting | Scale Won’t Turn On