Air Weigh BinMaxx - Setting Up Your Scale; Calibrating Your Scale; Setting Up Your Display

15
Setting Up Your Scale
The setup menu allows you to calibrate and set parameters for your
scale. To reach the setup menu, select SETUP from the main menu
and press OK.
Calibrating Your Scale
To calibrate your scale, select CALIBRATION from the setup menu
and press OK. Follow the instructions on pp. 4-8.
Setting Up Your Display
The display setup menu allows you to choose whether the scale
displays weight in pounds or kilograms; the brightness of the screen;
and the amount of time elapsed before the scale’s backlight turns off.
To select units of weight:
1. From the weight display, press ESC to reach the main menu.
2. Press▼untilSETUPisashing.PressOK.
3. Press▼untilDISPLYSETUPisashing.PressOK.
4. Press▼untilLBS/KGSisashing.PressOK.
5. Use▲or▼toselecteitherPOUNDSorKILOGRAMS.
Press OK. The screen will display POUNDS, (Now Lbs) or
KILOGRAMS, (Now Kgs) respectively.
Using BinMaxx | Setting Up Your Scale