AIREDALE LogiCool InRak - Levelling the Unit

IT Cooling
LogiCool InRak™
55
InRak™ Technical Manual 7462807 V1.11.0_04_2016
Installation
Installation
Levelling
The unit once positioned shall be levelled. This ensures that the unit has an air tight seal between the InRak and any
adjacent server racks. Unit need to be level to ensure that any condensate collected is disposed of correctly.
Brush Seal
Levelling foot adjustment
Note: The brush seal compresses when the feet are adjusted creating a tight seal to the oor. The seal is supplied loose
for easy tment.
Push
Brush Seal
Unit Base