InRak™ Technical Manual 7462807 V1.11.0_04_2016
Inputs or outputs not required will not be connected, nor will they appear on the display keypad.
Operational Maintenance checks
Owner’s Responsibility
To ensure that the unit can be maintained correctly ensure the following requirements are met.
Maintain a safe working environment around the unit, free from obstructions and debris.
The unit shall observe the following maintenance regime as a minimum.
CAUTION
The equipment contains live electrical and moving parts, ISOLATE prior to maintenance or repair work. Ensure Lock off
procedures are carried out accordingly.
Maintenance
SERVICE INDICATOR
The maintenance of key components such as compressors, fans and air lters can be monitored via a service indicator
which visually demonstrates the status relative to the component service intervals.
Inputs and outputs can be located by the labels to the microprocessor controller.
To Next Page
Loading...
