airmaster CV 80 - Air Flow - Manuel Setting

8
_
+
auto auto
auto
3.2.4. Air Flow - Manuel Setting
Drag your nger on the setting area
clockwise to increase air ow or
counter clockwise to reduce air ow.
The light will follow your movement.
Lift nger from the area when the
required air ow is shown. The cur-
rent setting will then be shown again
with a single blue stripe.
After 12 hours (time can be adjusted
to 0, 1, 2, ... 255 hours using a PC with
Airlinq Service Tool loaded) the unit
will return to automatic operation.
Press the current air ow. The automatic operating lock will cancel
when the air ow display is marked up to the current setting by blue
stripes.
The same setting can be made by pressing the required air ow if the
automatic operating lock is not active.
Lift nger from the area when the
required air ow is shown. The cur-
rent setting will then be shown again
with a single blue stripe.