FS3 Frame Synchronizer/Converter v1.1r1 89 www.aja.com
Appendix A – Specifications
FS3 Tech Specs
Video Input Digital
• Four 3G-SDI inputs, 2 BNC and up to 2 ber (optional)
• 4x1 selector feeds video processor
• 3G-SDI/HD/SD, SMPTE-259/292/424, 8 or 10-bits
• 3G-SDI Level A, Level B-DL, or Level B-DS
• Dual Link HD-SDI (2x1.5G), SMPTE -372
• Single Link 3G-SDI/HD/SD
• Fiber SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector modules
• Single Channel LC connector modules
• Single Channel SC connector modules
• Formats and frame rates
• (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 50, 59.94
• (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 50, 59.94
• (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 50, 59.94
• (HD) 1920 x 1080i 50, 59.94
• (HD) 1280 x 720p 50, 59.94
• (SD) 625i 50
• (SD) 525i 59.94
• YCbCr, 4:2:2, 10-bit
Video Output Digital
• Twelve 3G-SDI outputs, 8 BNC and up to 4 ber (optional)
• Video processor feeds all outputs
• 3G-SDI/HD/SD, SMPTE-259/292/424, 8 or 10-bits
• Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD pixel
mapping
• 3G-SDI Level A, Level B-DL, or Level B-DS
• Quad 3G-SDI for 4K/UltraHD p50/59.94 (3 copies on Quad SDI)
• Dual 3G-SDI for 4K/UltraHD p23.98/24/25/29.97 (6 copies on Dual SDI)
• Single Link SD/HD/3G-SDI (12 copies on single SDI)
• Fiber SDI, SMPTE-297, 8 or 10-bits (optional)
• Dual Channel LC connector modules
• Single Channel LC connector modules
• Single Channel SC connector modules
To Next Page
