HELO H.264 Streaming and Recording Encoder v1.1r1 16 www.aja.com
Chapter 4 – eMini-Setup
Overview
This chapter describes using the eMini-Setup application to initially communicate
with and configure the HELO over a direct USB connection. Once configured,
the HELO can be accessed via an Ethernet network using a web browser.
Subsequently, that device can then be reconfigured over that network, using its
IP address and built in web server.
NOTE: The eMini-Setup application is only used to setup selected Ethernet capable AJA
devices, and cannot be used to connect to or setup other AJA Mini-Converters.
The general procedure is:
1. Acquire eMini-Setup from the AJA website and install the eMini-Setup
application onto a computer.
2. Connect the HELO to that computer’s USB port.
3. Launch the eMini-Setup application.
4. Go to the Control Network tab and Media Network tab, where the IP
address settings are displayed. You can use the existing DHCP assigned IP
address, or it can be changed manually.
5. You can also use eMini-Setup to load rmware to the device, although this
can also be done quickly and easily using the web browser interface.
Acquiring eMini-Setup
AJA’s eMini-Setup application is available for download from the AJA website.
To download the latest eMini-Setup package, which includes the eMini-Setup
application and documentation:
1. Go to:
https://www.aja.com/family/software#eminisetup
2. Click the link corresponding to the version you want to download for Mac or
Windows.
AJA Documentation
Included with the eMini-Setup download is the AJA device's documentation,
which can be accessed from the eMini-Setup UI via the Help/Manual drop-down
menu. This manual includes eMini-Setup information.
Documentation can also be accessed directly from the Mac eMini-Setup installer
in the Documentation folder.
Documentation included with the eMini-Setup application is the version available
at the time of distribution. However, AJA’s documentation can be updated
regularly, so newer versions may exist.
To download just the latest documentation, go to:
https://www.aja.com/support
Click the product name and open the Manuals link.
To Next Page
