HELO H.264 Streaming and Recording Encoder v1.1r1 53 www.aja.com
3. In the RTMP Server URL eld, enter the IP address (or URL) of the server
followed by a slash, then the engine name. For example:
rtmp://10.3.0.75/livestream1
-or-
rtmp://wowza.aja.com/livestream1
It is not necessary to enter the port number if you are using the default port
number (1935). For example, when using the default port number, these
two addresses would be equivalent:
rtmp://wowza.aja.com/livestream1
rtmp://wowza.aja.com:1935/livestream1
However, if you are not using the default port number, it will be necessary
to enter it explicitly.
4. In the RTMP Stream Name eld, enter the name of the stream. You can
name the stream anything you like, for example, "myStream".
Initiate HELO Streaming Output
To initiate the HELO streaming output, press the Stream button from your HELO
unit's front panel, or click the Stream button from the HELO web user interface.
YouTube Live
YouTube Live is a free streaming service available to YouTube users.
YouTube Setup
Your YouTube channel must be verified, you need to enable live streaming, and
your account cannot be restricted. See YouTube help for more information about
setting up live streaming.
Encoder Information
Sign in to YouTube, go to your YouTube channel, click on Upload, and click on Live
Streaming.
• Server URL
• Stream name/key
HELO Streaming Profile Required Settings
Stream Type RTMP
RTMP Server URL <Server URL>
RTMP Stream Name <Stream name/key>
Link to YouTube Recommended Settings
https://support.google.com/youtube/answer/2853702?hl=en
NOTE: H.264 Main Profile is recommended, which is the HELO factory default (parameter
located under Advanced Settings).
To Next Page
Loading...
