1
1
Chapter 3: Front Panel Operation
3
Overview
There are three ways to control Ki Pro: the front panel, remotely from a web browser
connected via ethernet, or a wireless browser (iPhone etc.) via 802.11. This chapter
discusses controlling and using Ki Pro from its front panel. (Remote control via
browser is discussed later in Chapter 4.)
In Chapter 2 we discussed the panel controls overall, so ensure you read and
understand that material first. Here in this chapter we introduce each of the front
panel's modes and menus—plus talk about Clips and Reels, with procedures for basic
use.
First we introduce the two basic front panel modes, TRANSPORT and MENU, followed
by how the SELECT and ADJUST buttons operate in each of these two panel modes.
The TRANSPORT mode is the default mode—it controls basic PLAY, STOP, FF, REV, etc.
functions. In the TRANSPORT mode, the Select buttons (up or down) cycle through
the clips in the currently selected storage slot (like previous/next), and the Adjust
buttons allow single-stepping, frame forward or backward. The following shows the
display for the TRANSPORT mode:
For the MENU mode, depressing one of the 3 MENU buttons (STATUS, CONFIG, or
MEDIA) will enter the corresponding menu.
Clip SC12BTK1 D1 47%
Reel 212 01:02:22:14
TRANSPORT Mode
To Next Page
Loading...
