1
51
Ki Pro Installation and Operation Manual — MEDIA menus
15.4 DROPPED FRAMES
This parameter determines how playback handles dropped frames.
16.1 FORMAT MEDIA
This parameter is used to format the currently selected storage device.
16.2 DELETE CLIPS
This parameter can be used to delete all of the clips on the media.
The Ki Pro Storage Module can be used to hold data other than Apple ProRes 422
QuickTime recordings. If other files are saved to the Ki Pro Storage Module, they should
be placed outside of the "AJA" folder. Any material inside of the "AJA" folder will be
erased if a MEDIA>Delete Clips>DELETE ALL is performed.
17.0 REEL NAME
This parameter sets the reel name associated with all clips generated while using this
setting. The reel name is a number between 001 and 999. It is historically linked to the
naming conventions used for film and tape-based media. The REEL NAME is an
incrementing three digit value that works with EDLs. For this reason, the parameter
does not have a “NONE” selection—all clips will be associated with a REEL NAME. The
REEL NAME parameter is also the name of the media as it will appear when the storage
device (storage module or ExpressCard/34) is mounted on a Mac OSX desktop (and
media was formatted by the user). Note: the REEL NAME cannot be changed once a
recording session starts on the storage unit without reformatting the drive.
17.2 CLIP NAME
This parameter determines the clip name associated with all clips generated while
using this setting. The clip name is either “Clip” or “SC”.
15.4 DROPPED FRAMES CONTINUE
STOP
In the unlikely event that the playback of a clip(s) begins
to drop frames, this parameter allows users to define
whether the playback continues or stops.
16.1 FORMAT MEDIA KEEP MEDIA (default)
FORMAT MEDIA
No action (do not format the media device selected)
Format the selected media device (you will be prompted
Y/N?). If no media is inserted in the Ki Pro, the message
“No Storage” is displayed.
16.2 DELETE CLIPS KEEP CLIPS (default)
DELETE ALL
No action (do not delete clips)
Delete all clips on the storage device when DELETE
CLIPS is pressed or Adjust up arrow is pressed and held
for 2 seconds. If no media is inserted in the Ki Pro, the
message “No Storage” is displayed.
17.0 REEL NAME 001 to 999
(default = 001)
Press ADJUST button up or down to change the REEL
NAME value from 001 to 999.
17.2 CLIP NAME SC (default)
Clip
Clips generated will have filenames beginning with “SC”
Clips generated will have filenames beginning with “Clip”
To Next Page
Loading...
