AJA Ki Pro - Clip Number; Clip Append; Alpha Append; Take

1
53
Ki Pro Installation and Operation Manual — MEDIA menus
17.3 CLIP NUMBER
This parameter determines the clip number, from 1 to 999, that follows the CLIP NAME,
and is associated with all clips generated while using this setting.
17.4 CLIP APPEND
This parameter is used with parameter 17.5 ALPHA APPEND to append a text value
after the CLIP NUMBER or have no text appended.
17.5 ALPHA APPEND
This parameter is used with parameter 17.4 CLIP APPEND to append a text value after
the CLIP NUMBER.
17.8 TAKE
This parameter determines the TAKE number, from 1 to 999, that follows the CLIP NAME
and CLIP NUMBER, followed by any ALPHA APPEND (if selected), generated for all clips
while using this setting.
There are rules that Ki Pro observes in relation to Clips and Takes:
1. Ki Pro will not overwrite an existing clip when using standard clip naming.
2. The Take number will auto-increment past existing numbers for the “prefix” as
defined by the Reel Name, Clip Name, Clip Number, Clip Append, Alpha Append,
and Take settings.
3. If the number is at “999” , Ki Pro will not auto-increment; instead it will register a
“Name In Use” alarm. This prompts you to select a new Clip Name, Clip Number,
Clip Append, Alpha Append, and/or Take settings so that a new unique “prefix” is
created. This action ensures files are unique and understandable, and that clips
are never overwritten.
Custom Clip
Naming
Beginning with Ki Pro 2.0 firmware, users can elect to give their clips names other than
the standard criteria provided by AJA. IMPORTANT: Certain characters may not be
allowed or supported if entered for a clip name. Examples include: punctuation marks
(other than internal spaces or periods), special characters (like @), and non-ASCII UTF-8
characters are rejected outright. Note: non-UTF-8 characters appear in some languages,
like Chinese and Japanese, and are not supported.
17.3 CLIP NUMBER 1 to 999
(default = 1)
Press ADJUST button up or down to change the
CLIP NUMBER value from 1 to 999.
17.4 CLIP APPEND ALPHA (default)
NONE
The text value entered in ALPHA APPEND is appended
to the CLIP NAME and CLIP NUMBER
No text is appended to the CLIP NAME and CLIP
NUMBER
17.5 ALPHA APPEND A to Z
(default = A)
Press ADJUST button up or down to change the ALPHA
APPEND value from A to Z. Alphabetic values increment
with A and Z wrapping around.
17.8 TAKE 1 to 999
(default = 1)
Ki Pro automatically generates a TAKE number.
Press ADJUST button up or down to change the
TAKE value from 1 to 999, if a value other than the
automatically generated value is desired.