DVD Recorder
13
Using the DVD Recorder
Turning the Unit On/Off
Your DVD Recorder requires a mains supply of 230-240 Volts AC at
50Hz. Please ensure that your mains supply is compatible.
Insert the mains plug into a mains socket and switch on.
Initially the DVD Recorder will be in standby (Off) mode and the standby
indicator will glow red.
Press the STANDBY button (on the front of the DVD Recorder). The
standby indicator will glow green, indicating that the DVD Recorder is
on.
To switch the DVD Recorder to standby, press the STANDBY button on
remote control or on the DVD Recorder.
If the DVD Recorder is not going to be used for a long period disconnect
from the mains supply.
NOTE: The DVD Recorder is not disconnected from the mains
power supply while in the standby mode.
RDVD1002.book Page 13 Tuesday, January 24, 2006 12:25 PM
To Next Page
Loading...