RDVD1002
58
Version
This displays the current firmware version of the DVD Recorder.
Factory Reset
The Factory Reset function allows you to return the DVD Recorder to
the factory set condition. When this option is selected, a confirmation
screen is displayed.
Select Yes to return the DVD Recorder to the factory set condition or
cancel to return to the System menu.
While the DVD Recorder is resetting, Please Wait will be displayed.
NOTE: The Factory Reset function will not be available if a disc is
loaded.
RDVD1002.book Page 58 Tuesday, January 24, 2006 12:25 PM
To Next Page
Loading...