Alber e-fix E35 - Immobiliser Function; Activating, Deactivating, and Limitations

825
5.2.7 Immobiliser
Your e-fix is equipped with an immobiliser to prevent unauthorised use by a third party.
Activating the immobiliser
• Place the key [24] for about 2 seconds directly on the key symbol [20] on the control
unit. This activates the immobiliser and the message in the adjacent diagram “Immob-
iliser active” is shown in the display.
• The e-fix can no longer be operated. The “Immobiliser active” message remains visible
in the display until the e-fix is directly switched off by you or by the automatic cut-
off. However, the immobiliser remains active!
• When the e-fix is switched on again, the immobiliser – which is still active – is shown
once again in the display.
Deactivating the immobiliser
Place the key [24] for about 2 seconds directly on the key symbol [20] on the control
unit. This deactivates the immobiliser and the display returns to the user screen (see
chapter 5.3.2).
The immobiliser is not an anti-theft device because the drive wheels
can be disengaged and the wheelchair can then be pushed away.
9:30
28.06.14
Immobiliser active
Please unlock
!