46
Important operating and safety instructions
Jacking up the wheelchair is not permitted when the wheelchair user
is still seated.
Anti-tippers are not transfer rollers.
Do not move the wheelchair when it is jacked up.
Caution must be exercised when moving or collapsing the anti-tip-
pers, particularly when manually adjusting or activating. As a res-
ult of the necessarily high spring force there is a crushing hazard
between the holding rod [73] and the clamping piece [72].
Wichtige Hinweise
Any changes and assembly work on the anti-tippers, such as adjust-
ing the distance to the ground, may only be carried out by a trained
specialist dealer or by an Alber regional director.
The locking screw for the plug-in part (see [76] in the diagram
opposite) must be tightened to 5 Nm. Arrange for your specialist
dealer to carry out this assembly work.
The maximum permissible load for anti-tippers fitted in pairs is 210
kg. The use of only one fitted anti-tipper is not permitted.
Regularly check that the anti-tippers are still seated securely in the
mounting fork [71] of the bracket. Check that the support angle
[77] can still move freely. If screw connections have loosened or
have even come loose or if the support angle is no longer able to
move freely, contact your authorised specialist dealer to rectify the
situation.
73
72
76
77
71
To Next Page
Loading...
