Alcatel-Lucent 7750 SR OS - Page 242

Card, MDA, and Port Command Reference
Page 242 7750 SR OS Interface Configuration Guide
—no bert
— bit-error-insertion rate
—no bit-error-insertion
— channelized {ds1 | e1}
—no channelized
— cisco-hdlc
— down-count down-count
—no down-count
— keepalive time-interval
—no keepalive
— up-count up-count
—no up-count
— clock-source {loop-timed | node-timed}
— crc {16 | 32}
— description description-string
—no description
— [no] egress-scheduler-override
— level priority-level rate pir-rate [cir cir-rate]
—no level priority-level
— max-rate rate
—no max-rate
— egress-scheduler-policy port-scheduler-policy-name
— no egress-scheduler-policy
— encap-type {atm |
bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay
| wan-mirror | cisco-hdlc | cem}
— [no] feac-loop-respond
— frame-relay
— [no] frf-12
— egress
— qos-profile profile-id
—no qos-profile
— fragment-threshold threshold
—no fragment-threshold
— lmi-type {ansi | itu | none | rev1}
— mode {dce | dte | bidir}
— n391dte intervals
—no n391dte
— n392dce threshold
—no n392dce
— n392dte threshold
—no n392dte
— n393dce count
—no n393dce
— n393dte count
—no n393dte
— t391dte keepalive
—no t391dte
— t392dce
keepalive
—no t392dce
— framing (DS3) {c-bit | m23}
— idle-cycle-flag {flags | ones}
— load-balancing-algorithm option
—no load-balancing-algorithm
— loopback {line | internal | remote}
—no loopback