RADIUS Attributes Reference
7750 SR RADIUS Attributes Reference Guide Page 147
42 Acct-Input-Octets Indicates how many octets have been received from the user over the course
of this service being provided and included when standard accounting
attributes are configured. (configure subscriber-mgmt radius-accounting-
policy <name> include-radius-attribute std-acct-attributes). [52] Acct-
Input-Gigawords indicates how many times (if greater than zero) the [42]
Acct-Input-Octets counter has wrapped around 2^32.
43 Acct-Output-Octets Indicates how many octets have been send from the user over the course of
this service being provided and included when standard accounting attributes
are configured. (configure subscriber-mgmt radius-accounting-policy
<name> include-radius-attribute std-acct-attributes). [53] Acct-Output-
Gigawords indicates how many times (if greater than zero) the [43] Acct-
Output-Octets counter has wrapped around 2^32.
44 Acct-Session-Id A unique identifier that represents a subscriber host, a set of subscriber hosts
that belong to the same queue-instance or a set of hosts that belong to a PPPoE
or IPoE session. The attribute can have a fixed 22 byte hexadecimal number
format or a variable length description format (configure subscriber-mgmt
radius-accounting-policy <policy-name> session-id-format
{number|description}). For DSM the attribute has a fixed 10 byte
hexadecimal number format with each byte separated by a hyphen.
This attribute (in number format) can be used as CoA or Disconnect Message
key to target the hosts or session.
45 Acct-Authentic Indicates how the user was authenticated. Attribute is omitted in accounting
via configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute no acct-authentic.
46 Acct-Session-Time Reports the elapsed time in seconds over the course of this service being
provided. When the accounting session time equals zero (for example when
the accounting start is followed immediately by an accounting interim update
or by an accounting stop within the same second), then the attribute is not
included.
47 Acct-Input-Packets Indicates how many packets have been received from the user over the course
of this service being provided and included when standard accounting
attributes are configured. (configure subscriber-mgmt radius-accounting-
policy <name> include-radius-attribute std-acct-attributes). There is no
overflow attribute when attribute wraps around 2^32.
48 Acct-Output-Packets Indicates how many packets have been send to the user over the course of this
service being provided and included when standard accounting attributes are
configured. (configure subscriber-mgmt radius-accounting-policy <name
>
include-radius-attribute std-acct-attributes). There is no overflow attribute
when attribute wraps around 2^32.
Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
