Alcatel-Lucent 7750 - Page 148

Enhanced Subscriber Management (ESM) Accounting
Page 148 7750 SR RADIUS Attributes Reference Guide
49 Acct-Terminate-Cause Indicates how the subscriber host or queue-instance or PPPoE/IPoE session
was terminated.
50 Acct-Multi-Session-Id A unique Accounting ID that links together multiple related accounting
sessions. Each linked accounting session has a unique [44] Acct-Session-Id
and the same [50] Acct-Multi-Session-Id.
This attribute is not sent if only queue-instance accounting mode is enabled.
The attribute can have a fixed 22 byte hexadecimal number format or a
variable length description format (configure subscriber-mgmt radius-
accounting-policy <policy-name> session-id-format
{number|description}).
For DSM the attribute has a fixed 10 byte hexadecimal number format with
each byte separated by a hyphen. There are no DSM hosts linked together
through this attribute.
52 Acct-Input-Gigawords Indicates how many times (one or more) the [42] Acct-Input-Octets counter
has wrapped around 2^32 in the course of delivering this service and send
together with [42] Acct-Input-Octets, [43] Acct-Output-Octets and [53] Acct-
Output-Gigawords when standard accounting attributes are configured.
(configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute std-acct-attributes). The attribute is not sent when its
value=0.
53 Acct-Output-
Gigawords
Indicates how many times (one or more) the [43] Acct-Output-Octets counter
has wrapped around 2^32 in the course of delivering this service and send
together with [42] Acct-Input-Octets, [43] Acct-Output-Octets and [52] Acct-
Input-Gigawords when standard accounting attributes are configured
(configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute std-acct-attributes). The attribute is not sent when its
value=0.
55 Event-Timestamp Record the time that this event occurred on the NAS, in seconds since January
1, 1970 00:00 UTC
61 NAS-Port-Type The type of the physical port of the NAS which is authenticating the user and
value automatically determined from subscriber SAP encapsulation. It can be
overruled by configuration. Included only if include-radius-attribute nas-port-
type is added per application: configure subscriber-mgmt authentication-
policy (ESM authentication), configure subscriber-mgmt radius-
accounting-policy (ESM accounting), configure aaa isa-radius-policy (LSN
accounting, WLAN-GW) and configure aaa l2tp-accounting-policy (L2TP
accounting). Checked for correctness if returned in CoA.
Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name Description