Alcatel-Lucent OmniSwitch AOS Release 6 - Page 130

SNMP Overview Using SNMP
page 3-44 OmniSwitch AOS Release 6 Switch Management Guide July 2010
138 sdpBindSdpStateChangeProcessed sdp This trap is sent when the agent
has finished processing an SDP
state change event, and that the
operating status of all the
affected SDP Bindings has been
updated accordingly.
sdpNotifySdpId—The SDP that experienced the state change.
139 unused N/A N/A
.
140 unused N/A N/A
141 unused N/A N/A
142 ddmTemperatureThresholdViolated ifIndex
ddmNotifica-
tionType
ddmTempera-
ture
This trap is sent when an SFP/
XFP/SFP+ temperature has
crossed any threshold or
reverted from previous threshold
violation for a port represented
by ifIndex. It also provides the
current realtime value of SFP/
XFP/SFP+ temperature.
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTemperature—The temperature, in tenths of a degree celcius.
143 ddmVoltageThresholdViolated ifIndex
ddmNotifica-
tionType
ddmSupply-
Voltage
port This trap is sent when SFP/XFP/
SFP+ supply voltage has crossed
any threshold or reverted from
previous threshold violation for a
port represented by ifIndex. It
also provides the current realtime
value of SFP/XFP/SFP+ supply
voltage.
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5)
ddmSupplyVoltage—The voltage, in tenths of a volt.
144 ddmCurrentThresholdViolated ifIndex,
ddmNotifica-
tionType
ddmTxBiasCur-
rent
port This trap is sent when if an SFP/
XFP/SFP+ Tx bias current has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Tx
bias current.
No. Trap Name Objects Family Description