___change-end___
2. Enter either:
• The pilot number and press the "Apply" softkey, or
• Press the "List" softkey to select the pilot that you want to forward.
The following screen is displayed:
___change-begin___
___change-end___
3. The following screen is displayed :
___change-begin___
___change-end___
4. Enter your password.
If the password is correct, the following screen is displayed:
___change-begin___
___change-end___
5. Press "Apply" softkey to confirm activation of a pilot general forwarding.
Results: Once the "Activating general forwarding" procedure has been accepted, the
following screen is displayed:
___change-begin___
*
!" #$
3-13
To Next Page
Loading...
