___change-end___
3. Enter your password.
If the password is correct, the following screen is displayed:
___change-begin___
___change-end___
4. Press "Apply" softkey to confirm cancellation of the pilot general forwarding.
Results: Once the "Cancelling general forwarding" procedure has been accepted, the
following screen is displayed:
___change-begin___
___change-end___
At the end of the "Cancelling general forwarding " procedure, the set returns to the idle
state.
b. General forwarding cancellation of a specific pilot using the programmable key with a
specific pilot number:
Procedure: To cancel general forwarding of a specific pilot:
1. Press the "Pilot x fwd" programmable key.
2. Enter your password.
3. Press the "Apply" softkey to confirm cancellation of this specific pilot general
forwarding.
Note:
The icon associated with the "Pilot x fwd" softkey indicates that the general call
forwarding is currently inactive.
At the end of the "Cancelling general forwarding" procedure, the set returns to the idle
state.
*
!" #$
3-15
To Next Page
Loading...
