Alcatel-Lucent OXO Connect Large User Manual

6.1.4.1 Configuration of the OXO Connect DHCP server for IP devices
Tue Feb 28 2013
DHCP
Status : Enable
DHCP4
Scroll
down
Scroll up
Tue Feb 28 2013
DHCP
Status : Enable
DHCP1
DHCP2
DHCP3
Disable
The following softkeys are available:
• Disable or Enable: Disabling or enabling OXO Connect DHCP server for IP devices provided by
ALE International (enabled by default)
• DHCP1: See Defining the IP address range for DHCP1 on page 172
• DHCP2: Defining the IP address range for DHCP2
• DHCP3: Defining the IP address range for DHCP3
• DHCP4: Defining the IP address range for DHCP4
Other fixed keys of the set:
• Back: Return to the previous menu (IP configuration on page 171)
• Exit: Return to home page
6.1.4.1.1 Defining the IP address range for DHCP1
Tue Feb 28 2013
DHCP1
StartIP EndIP
Note:
The available softkeys are the same for DHCP2, DHCP3, and DHCP4
The following softkeys are available:
• StartIP: See StartIP on page 173
• EndIP: See EndIP on page 173
Other fixed keys of the set:
Chapter
6
Start-Up
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 172/207

Alcatel-Lucent OXO Connect Large Specifications

General

Brand	Alcatel-Lucent
Model	OXO Connect Large
Category	Server
Language	English