C 90
5 / 6
Alcatel Vacuum Technology France --- IPUP A100 Instruction manual
Use of the serial link
TABLE OF MAX. / MIN.
PARAMETERS THRESHOLDS
PARAMETER UNIT THRESHOLDS
MIN. MAX. LIMIT
Purge flow sensor min 0 60 61 invalid
Purge prolonged time min 0 120
Pump temperature regul. °C 90 130
MODIFYING THE SEPARATOR
CHARACTER
ORDER
PARAMETER
RESPONSE ACTION
SEP
<val>
val = decimal
value of the
ASCII code of
the separator
character
between 1
and 255
OK
or
ERR3
l Change the separator charac-
ter between two consecutive
data items in a response.
l The factory configuration is the
decimal code ”032” of the ”spa-
ce” character.
l Memorization of the customer
configuration by the software.
Example :
A command such as: #000SEP044<CR> where “044” is the decimal
ASCII code of the character “,” (comma).
Command #000STA<CR>
Response #000,00000,2,0080,2530,0127,1230,0000000000<CR>
Only commands requiring the separator character are affected by the
SEP command.
To Next Page
Loading...
