Document 90-00073D Algo Communication Products Ltd (604) 454-3792
2016-09-29 4500 Beedie St Burnaby BC Canada V5J 5L2 support@algosolutions.com
Page 11 www.algosolutions.com
Web Interface
The 8201 SIP PoE Intercom is configurable using the web interface or
provisioning features.
After boot up, the speaker will beep and the intercom will have
obtained an IP address. If there is no DHCP server the 8201 SIP PoE
Intercom will default to the static IP address 192.168.1.111.
Before the 8201 is configured, the call button on the front can be
pressed to play the IP address over the speaker. (Once the SIP
Server field is populated on the 8201 web interface, the call button
will contact the preconfigured extension when pressed.) The IP
address may also be discovered by downloading the Algo locator tool
to find Algo devices on your network: www.algosolutions.com/locator
Enter the IP address (eg 192.168.1.111) into a browser such as
Google Chrome, Firefox, or Internet Explorer (other than IE9). The
web interface should be visible and the default password will be algo
in lower case letters.
To Next Page
Loading...
