Document 90-00073D Algo Communication Products Ltd (604) 454-3792
2016-09-29 4500 Beedie St Burnaby BC Canada V5J 5L2 support@algosolutions.com
Page 30 www.algosolutions.com
Generating a specific configuration file
1. Follow steps 1 to 6 as listed in the section “Generating a generic
configuration file”.
2. Rename file settings.txt to algom[MAC address].conf (e.g.
algom0022EE020009.conf)
3. File algom[MAC address].conf can now be uploaded on the
Provisioning server.
The specific configuration file will only be downloaded by the 8201
SIP PoE Intercom with the MAC address specified in the configuration
file name. Since all the necessary settings can be included in this file,
the 8201 will be ready to work immediately after the configuration
file is downloaded. The MAC address of each 8201 SIP PoE Intercom
can be found on the back label of the unit.
For more Algo SIP endpoint provisioning information, see:
www.algosolutions.com/provision
To Next Page
Loading...
