Document 90-00073D Algo Communication Products Ltd (604) 454-3792
2016-09-29 4500 Beedie St Burnaby BC Canada V5J 5L2 support@algosolutions.com
Page 14 www.algosolutions.com
Blue Call Button
The call button light will be steady during power up
and when the intercom is idle.
When making a call, the call button light will flash
rapidly, while the call is ringing at the far-end
phone. Once the call is answered, the flashing will
slow down.
Reset
The 8201 SIP PoE Intercom can only be reset during a power up.
To reset: reboot or power cycle the 8201 SIP PoE Intercom, wait
until the blue call buttons flashes and then press and hold the
button until it begins a double flash pattern. Release the call
button and allow the unit to complete its boot process. Do not
press the blue call button until it begins flashing.
A reset will set all configuration options to factory default including
the password.
To Next Page
Loading...
