50 Get more from your alienDVR with our Free CCTV tips at aliendvr.com
DVR Accessories
Kontrol & Kommand Module
• Control Third Party
Electrical Equipment
• Create Building
Automation With
An AlienDVR
• 8 Time Controlled Relays
• Use Up To 31 Modules
Per DVR
• Control Up To 248
Devices Per DVR
The Kontrol & Kommand module allows remote control of third party electrical
equipment/systems via the AlienDVR and our Free AlienVision software.
AlienVision sends a signal to the DVR which forwards the signal on to the Kontrol &
Kommand module. Each Module has 8 relays that can be opened or closed for adjustable
lengths of time.
You may send a signal to open RELAY 1 for 2 minutes, this may open a gate for a visitor.
Or you may send a signal to RELAY 9 (second K & K module) to close for 3 hours which
overrides a central heating controller. You might even open RELAY 3 for 9 minutes to
triggers a siren because you have spotted intruders.
You can assign “groups” to the relays. You can even name each function and button in the
software so that it’s really easy to use.
Order Code: REL008
• Hinged Lid For Easy
Installation And Access
• Lockable To Prevent
Unauthorised Access
• Easy Fit Fan Kits For
Extra Cooling
• Wall And Desk Boltholes
• Extra Deep Design To Suit
Most DVRs
Order Code: CCT245
Order Code: FAN012
(12V Fan Kit)
KitVault - DVR Enclosure
Order Code: VID501 (1M)
Order Code: VID502 (2M)
Order Code: VID503 (3M)
Order Code: VID505 (5M)
Order Code: VID510 (10M)
Order Code:
MEM678 (8GB)
HDMI Leads USB Memory Sticks
See online tip 276 for
a guide to using the
Kontrol & Kommand module
at aliendvr.com
TIP
276
For more information
on the KitVault see
online tip 258 at
aliendvr.com
TIP
258
To Next Page
Loading...