Removing the Wireless Card
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer.
After working inside your computer, follow the instructions
in After Working Inside Your Computer. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot. See “Removing the Stability Foot”.
2 Remove both the left and right side-panels. See “Removing the Side
Panels”.
3 If you have multiple graphics cards installed, remove the graphics card.
See “
Removing the Graphics Card”.
Procedure
1 Lay the computer on the left side.
2 Disconnect the antenna cables from the wireless card.
3 Remove the screw that secures the wireless card to the chassis.
110
To Next Page
Loading...
