Alienware Area-51 R2 - Replacing the Right Alienfx Side-Panel Connector; Procedure; Post-Requisites

Replacing the Right AlienFX
Side-Panel Connector
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer.
After working inside your computer, follow the instructions
in After Working Inside Your Computer. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Replace the screws that secure the right AlienFX side-panel connector to
the bracket.
2 Replace the screws that secure the right AlienFX side-panel connector to
the chassis.
3 Connect the cable that connects the right AlienFX side-panel connector to
the I/O board. See “I/O Board Components”.
Post-requisites
1 Replace both the left and right side-panels. See “Replacing the Side
Panels”.
2 Replace the stability foot.
48