Alienware Area-51 R2 - Replacing the Memory Fan; Procedure; Post-Requisites

Replacing the Memory Fan
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before Working Inside Your Computer.
After working inside your computer, follow the instructions
in After Working Inside Your Computer. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the memory fan with the slots on the chassis and slide
the fan until it snaps into position.
2 Replace the screw that secures the memory fan on the chassis.
3 Connect the memory fan cable from the connector on the system board.
For more information on the memory fan cable connector, see “
System
Board Components”.
Post-requisites
1 Replace both the left and right side-panels. See “Replacing the Side
Panels”.
2 Replace the stability foot.
91