Operating the monitor | 53
Input Source Use this menu to select between the different video
si
gnals that may be connected to your monitor.
DP Select the DP input when you are using the DisplayPort
(DP) connector. Press the joystick to confirm the
selection.
HDMI 1 Select the HDM
I 1 or HDMI 2 input when you are using
the HDMI connector. Press the joystick to confirm the
selection.
HDMI 2
Auto Select Automatically scans for available input sources. Press the
joys
tick to confirm the selection.
Options for
DP/HDMI
Allows you to set this feature to:
• Prompt for Multiple Inputs: Always displ
ays the
“Switch to DP/HDMI Video Input” message for you
to choose whether to switch or not.
• Always Switch:
Always switches to DP/HDMI video
input (without asking) when the DisplayPort or HDMI
cable is connected.
• Of
f: Never automatically switches to DP/HDMI
video input when the DisplayPort or HDMI cable is
connected.
Press the joystick to confirm the selection.
NOTE: This feature is disabled when Auto Select
is set to Off.
Reset Input
Sou
rce
Resets all settings under the Input Source menu to the
factory defaults.
Icon Menu and
submenu
Description
To Next Page
Loading...
