Operating the monitor | 71
OSD warning message
When the monitor does not support a part
icular resolution mode, you see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the horizontal and vertical
frequency ranges addressable by this moni
tor. The recommended resolution is
3840 x 2160.
NOTE: The message may be slightly different according to the connected
input signal.
You see the following message before the DDC/CI feature
is disabled:
When you adjust the Brightn
ess level above the default level for the first time,
the following message appears:
NOTE: If you select Yes, the message will not appear the next time you
change the Brightness setting.
To Next Page
Loading...
