Alinco DR-620T - Using the Parameter Setting Mode

27
Parameter Setting Mode
To use the parameter setting mode
1. Press the FUNC key for more than 2 seconds to
enter the parameter Setting mode.
2. Select a menu by pressing the FUNC key and
the SQL key, or UP/DOWN keys on the micro-
phone.
3. Rotate the main dial to change the setting.
4. Pressing the FUNC/SQL and UP/DOWN key
will complete the setting and enter the next
menu.
5. Pressing any key other than the FUNC/SQL or
the UP/DOWN key will complete the setting
and the unit will exit the parameter setting mode.
Default display