Alinx AXU4EV-E - Part 3.11: MIPI Camera Interface

ZYNQ Ultrascale + FPGA Board AXU4EV-E User Manual
50 / 58
Amazon Store: https://www.amazon.com/alinx
PL_485_RXD1
B44_L4_P
AE13
The 1
st
Channel 485 Receiver
PL_485_DE1
B45_L10_P
B11
The 1
st
Channel 485 Transmit
Enable
PL_485_TXD2
B43_L1_N
AG10
The 2
nd
Channel 485 Transceiver
PL_485_RXD2
B44_L4_N
AF13
The 2
nd
Channel 485 Receiver
PL_485_DE2
B45_L10_N
A10
The 2
nd
Channel 485 Transmit
Enable
Part 3.11: MIPI camera interface
The AXU4EV-E carrier board includes a MIPI camera interface, which can
be used to connect with the ALINX Brand MIPI OV5640 camera module
AN5641. MIPI interface 15PIN FPC connector, 2 LANE data and 1 pair of clock,
connected to the differential IO pin of BANK65, the level standard is 1.2V; other
control signals are connected to the IO of BANK43, level standard It is 3.3V.
The circuit schematic of the MIPI interface part is shown in Figure 3-11-1
below:
Figure 3-11-1: MIPI camera interface design schematic